Selected products were added to comparison
See products on comparison page
WEG steam turbine, TMFlex line, is backpressure type, built with impulse technology and has multiple stages. It operates up to 652 psia (45 bara) inlet steam pressure and 842 °F (450 °C) inlet steam temperature, generating up to 5MW. The TMFlex line is extremely compact and was designed to drive small size generators, besides mechanical equipment, such as compressors, pumps and mills.
Technical Characteristics
- Impulse tecnology and multi-stage
- Backpressure
- Nominal power output up to 5 MW
- Inlet pressure up to 652 psia / 45 bar(a)
- Inlet temperature up to 842 °F / 450 °C
Comprehensive, integrated and smart solution
With a comprehensive range of products and solutions tailored for steam power generation and mechanical drives, WEG designs, manufactures, and installs steam turbines, gearboxes, generators, as well as control and automation panels. All the components are designed using advanced technology and adhere to rigorous international quality standards. The steam turbines are available for various industrial segments and operate with steam derived from diverse sources like biomass, biogas, natural gas, heat recovery, waste-to-energy, and more.
Segments:
- Food and Beverage
- Pulp and Paper
- Cement
- Corn Ethanol
- Wood
- Mining
- Oil, Gas and Petrochemicals
- Waste-to-energy
- Steel
- Sugar-energy
- Thermal power plants
- Others
What is a Steam Turbine?
It is a machine that extracts thermal energy from the steam and converts it to mechanical work on a rotating shaft. The thermal energy is converted into kinetic energy through the expansion of the steam inside the turbine. The steam flows through properly designed fixed blades (stator) and moving blades (rotor) so that, according to the principles of impulse or reaction, they can efficiently transfer energy to the turbine shaft. During the expansion, there is a change in enthalpy due to the decrease in pressure and temperature of the steam, as well as the increase in its specific volume. Depending on the flow rate, this results in a certain power output on the shaft. Thus, the mechanical energy generated on the turbine shaft allows for the drive of various types of rotating equipment, such as fans, pumps, mills, compressors, and also 2 or 4-pole generators for electricity production. WEG has its own technology for the design and manufacture of impulse and reaction steam turbines, with an output power of up to 150 MW. The turbine frames are available in single or multiple stages, backpressure and condensing, with or without controlled extraction, and can operate with superheated or saturated steam.
