Main characteristics

• Output current from 1,0 a 33 A (0 0,33 to 20 cv, 33 to 20 cv);
• Single-phase or three-phase supply voltage 200-240 V or 380-480 V;
• Scalar Control (V / F), Vector Control (VVW), Sensorless Vector or Vector with Encoder Control and Permanent Magnet Motor Control (VVW PM);
• Selectable plug-in modules;
• Plug and Play philosophy;
• Built-in operating and programming interface (HMI);
• Pump Genius: functions dedicated to driving pumps;
• Safety Function: STO and SS1 level SIL 3 / PLe;
• SoftPLC - built-in PLC functionalities;
• Braking IGBT (incorporated for all models);
• Protection ratings;
• Models with optional built-in disconnector for power isolation;
• Internal RFI filter (optional);
• USB communication port (CFW500-CUSB accessory);
• Free WLP and WPS programming software application available at  Softwares.

Flexibility and Performance

The new version with IP66/NEMA type 4x protection rating increases the product robustness, ensuring protection against the ingress of dust and water jets from any direction, which allows its use and installation both indoors and outdoors.

The CFW500 IP66 has an advanced design and can be selected according to the application needs, providing flexibility with excellent performance. The installation is simple and its configuration and operation is intuitive, with menu navigation through the operator interface (IHM) with built-in LCD display.  In addition, the new models have full compatibility with the existing plug-ins of the CFW500 line.

Features

• Password to protect the parameters J Special engineering units (RPM, ºC, Nm, mA, %, kW, kWh, among others)
• Backup of all parameters (via WPS software, memory card or memory of the CFW500)
• Possibility to save up to two different settings on the memory
• Setting of the switching frequency according to the application requirements
• Multispeed with up to eight programmable speeds
• Slip compensation
• Manual or automatic torque boost (V/F scalar mode) or self-adjustment (VVW vector mode)
• Acceleration/deceleration ramps
• "S" type ramp
• DC braking
• Internal dynamic braking (frame size B and biggers)
• PID controller to control processes in closed loop
• Flying start / Ride-through
• Sleep mode
• Skip frequencies or frequency ranges function
• Overload and overtemperature protection
• Overcurrent protection
• DC link voltage supervision
• Fault log