Want to improve your productivity? Count on WEG power generation solutions and drives.
For projects of all sizes, WEG develops solutions or equipment that meet the most different requirements. They are products and equipment that carry WEG quality.
Our equipment lines for your projects:
Turbines for electric power generation and mechanical drives
- Rated output power up to 150 MW
- Inlet pressure up to 140 bar (a)
- Inlet temperature up to 540 °C
- Impulse and Reaction Technologies
- Applied in Back Pressure and Condensation
- Available with controlled or extraction or not and induction
Turbine models/powers applied to high pressure and temperature steam
- 140 bar (a) | 540 °C | 150 MW - Back pressure - BT and BTE
- 140 bar (a) | 540 °C | 150 MW - Condensation - CT and CTE
- 140 bar (a) | 540 °C | 150 MW – Condensation – CT Axial Flow
- 70 bar (a) | 530 °C | 55 MW - Back pressure - TM-A and TME-A
- 70 bar (a) | 530 °C | 25 MW - Condensation - TMC-A and TMCE-A
- 65 bar (a) | 480 °C | 2 MW - Back pressure - TS-P
Turbine models/powers applied to medium pressure and temperature steam
- 45 bar (a) | 450 °C | 20 MW - Back pressure - TM and TME
- 45 bar (a) | 450 °C | 17 MW - Condensation - TMC and TMCE
- 45 bar (a) | 450 °C | 5 MW - Back pressure - TM Flex
- 45 bar (a) | 450 °C | 3 MW - Condensation - MCT
- 45 bar (a) | 450 °C | 5 MW - Back pressure - TS
Turbine model/power applied to low pressure and temperature steam
- 22 bar (a) | 320 °C | 1 MW - Back pressure - TG
Turbo Gearbox Lines
- RTS/RTM up to 20 MW
- SuperTurbo from 20 to 60 MW
Power Generator Lines
- ST20 – Application in 2 poles, power up to 200 MVA—power above on request
- ST40 – Application in 4 poles, power up to 70 MVA
- ST41 – Application in 4 poles, power up to 70 MVA
Gearboxes Lines
- High speed parallel shaft gear for industrial processes
- Parallel shaft special projects—developed and manufactured according to the application and requirements
- Planetary for mechanical drives in cement / mining / steel processes
- Planetarium model G3 Full—Sugar-ethanol application, up to 10,000 kN.m
Multiplier Lines
- Applied in hydroelectric generation stations and small hydroelectric plants
- Applied in wind power generators
Service
All solutions and equipment are delivered with specialized field services: installation, commissioning, start-up, operation, monitoring and after-sales technical support—an exclusive advantage that increases the market trust in WEG.
Recognized as an expert in clean energy generation, WEG also provides mechanical, electrical and electronic services—such as tune-up, repairs, restoration, overhaul, repowering, retrofit and maintenance—for its own equipment and from other manufacturers, 24/7.
In addition to steam turbines, gearboxes, generators and multipliers, complete solutions are provided covering mechanical, electrical, electronic and digital equipment for Industry 4.0.
